Used Audi A3 wing mirror: how to buy one that fits
To buy a used Audi A3 wing mirror that fits, match four things: the side (nearside is the passenger side on a UK car, offside the driver's side), the generation (8P 2003 to 2012, 8V 2012 to 2020, 8Y 2020 on), your Audi paint code such as LY3J Brilliant Red or LZ9Y Phantom Black, and the features wired into the plug. A wing mirror is handed and trim specific, so a genuine used unit fits and looks factory at a fraction of the cost of a new one, as long as you order the correct version. This guide covers how to tell the versions apart and what we usually hold for the A3 in Doncaster.
Which side do I need, nearside or offside?
Mirrors are handed and the two sides are not interchangeable. On a UK right hand drive car the nearside is the passenger side, the left as you sit in the car, and the offside is the driver's side, the right. The glass is also different: the driver's side on most A3 models is flat or lightly convex, while the passenger side is more convex (aspheric) to widen the view. Listings use LH or NS for passenger side and RH or OS for driver's side. If you are unsure, stand behind the car facing forward: your left hand is the nearside. Our guide to nearside or offside goes into more detail.
Which Audi A3 generation do I have?
The mirror changed with every generation, and the housing, base and plug do not swap over. The 8P ran from 2003 to 2012 and was facelifted in 2008, when the indicator moved to a slim LED strip in the housing. The 8V ran from 2012 to 2020 with a 2016 facelift, and the 8Y arrived in 2020. Within the 8P family, the three door, five door Sportback and Cabriolet share the same mirror design, but Cabriolet parts carry 8P7 numbers rather than 8P0 or 8P4, so check the prefix on the listing. Your registration confirms the exact build and we match it before you pay.
| Generation | Years | Mirror notes |
|---|---|---|
| 8P pre-facelift | 2003 to 2008 | Larger housing, indicator in lower housing on later cars |
| 8P facelift | 2008 to 2012 | LED indicator strip; Cabriolet parts prefixed 8P7 |
| 8V | 2012 to 2020 | Slimmer housing, 2016 facelift changed the indicator |
| 8Y | 2020 on | New design, nothing carries over |
How do I read the Audi part number on a mirror?
Audi part numbers work like all VW Group numbers. The first three characters identify the model (8P0 for the A3 8P, 8P7 for the 8P Cabriolet, 8V0 for the 8V), the next three identify the group (857 covers mirrors), and the remaining characters identify the exact part, side and version. The number is usually on a label or moulded into the base. If you can read it off your damaged mirror, send it to us and we will compare it with the unit on the shelf. Audi supersedes numbers over the model's life, so a later suffix can still be the right part. Our product titles carry the OE number wherever one is present, and our guide to what an OE part number is explains the system.
How do I get the colour right?
Most A3 mirror caps are painted in the body colour, so the paint code matters. Audi puts the code on a sticker in the spare wheel well or boot floor and in the service book. Codes are four characters, for example LY3J Brilliant Red, LZ9Y Phantom Black Pearl, LY9B Brilliant Black and LX7Z Monsoon Grey. S line and some higher trims have aluminium look caps instead, and many owners fit gloss black or carbon caps, so match what your car currently has or specify the finish you want. A colour matched cap goes straight on. Our listings state the colour code in the title where it is known and the photos show the real part.
Which features does my mirror need to match?
A3 mirrors can be heated, electrically adjusted, power folding, auto dimming, fitted with puddle lights, and, on the 8V and 8Y, fitted with Side Assist blind spot warning. Each feature adds wires to the plug, so a mirror with fewer functions will not give you what your car expects, and one with more may not plug in or may throw a fault. Count the pins in your plug and compare them with the listing, or send us your registration and we will check the specification. Power folding is the most common mismatch: a non folding mirror on a car with folding mirrors leaves the other side folding on its own.
What we usually have in stock for the Audi A3
Stock changes daily as cars arrive and are dismantled, and mirrors in popular colours sell quickly. These are typical A3 8P parts from live listings at the time of writing, with the OE numbers and colour codes from the titles. The Audi A3 collection shows what is on the shelf right now, and the glass, mirrors and wipers collection covers mirrors for every make.
- A3 8P Cabriolet door mirror, driver side, Brilliant Red LY3J, 2008 to 2013
- A3 8P door mirror, passenger side, black, 2008 to 2013
- A3 8P five door front door mirror, Phantom Black LZ9Y
- A3 8P interior door mirror trim, right hand, 8P7857504A
- A3 8P A pillar trims, left 8P7867233B and right 8P7867234B
- A3 8P headlamp, right hand driver side, 8P0941004, 2008 to 2013
- A3 8P facelift front bumper support brackets pair, 8P0807134A
- A3 8P bonnet hinges pair, 8P0823301 and 8P0823302
- A3 8P front wiper arm pair, 8P2955408
If you drive another German hatch, see our guides to the BMW 1 Series wing mirror and the Mercedes A-Class wing mirror.
Buy with confidence
Every Partsworth mirror comes off a known donor car, is inspected before listing, and is photographed so you see the real part, not a stock image. Every order has tracked UK delivery, free on most parts; panels, engines and gearboxes carry a charge shown on the product page. Order before 2pm on a working day for same-day dispatch, and every part has 30 day returns. Send us your registration and the part you need and we will confirm fitment before you buy. Parts worth your trust.
Frequently asked questions
How do I know which side wing mirror I need?
Mirrors are handed. On a UK car the nearside is the passenger side, the left as you sit in the car, and the offside is the driver's side, the right. Listings use LH or NS for passenger and RH or OS for driver. Order the side that matches, because the housing, base and glass differ.
Will a mirror from a different Audi A3 fit?
Not across generations. The 8P (2003 to 2012), 8V (2012 to 2020) and 8Y (2020 on) use different mirrors, and the 8P facelift in 2008 changed the indicator. Within the 8P, the Cabriolet uses 8P7 prefixed parts. Confirm your generation, which your registration makes certain, before ordering.
Does a used A3 mirror need to be the right colour?
Most caps are painted body colour, so match your four character Audi paint code from the boot floor sticker, for example LY3J Brilliant Red or LZ9Y Phantom Black. S line cars may have aluminium look caps. If the colour differs, the cap alone can be swapped or painted, so the complete unit is still worth buying.
Which mirror features do I need to match?
Match heated, electric, power folding, auto dimming, puddle light and Side Assist if your car has them. Each feature adds pins to the plug, so count the pins on your old mirror and compare with the listing. A mirror with fewer functions will not work fully, and one with more may not plug in.
Can I replace just the mirror glass?
Yes, if the housing and motor are fine. The glass clips onto the backing plate and takes a few minutes to swap. If the housing is cracked, the motor has failed or the base is broken, buy the complete used unit, which usually costs less than a new glass and cap together.
Read our guide: Used Audi A4 headlight: how to buy the right one.